Stapler Unit Operation All communication and control of the mailbox, the 2000-sheet Input Tray, and the stapler unit is through the Paper Handling Controller. These instructions are sent to the stapler controller PCA located in the lower part of the stapler. Power is provided to the stapler by the 8-bin Mailbox/5-bin mailbox with Stapler external 24V DC power supply through the C-link cable. It handles letter and A4 sizes of plain paper. The stapler can staple up to a maximum of 20 sheets. Table 5-10.
Stapler Motors, Sensors, and Switches C4085-91087 Paper Paths and Components 139 Control Device Title Location M1 Stapler DC Motor Stapler Assembly M2 Rack Stepper Motor Top Cover Assembly M3 Slider Stepper Motor Top Cover Assembly M4 Retainer DC Motor Stapler bed Assembly IR Sensor Infra Red Sensor Stapler bed Assembly STL Sensor Stapler Sensor Stapler Assembly PSRack Rack Sensor Top Cover Assembly PSSlider Slider Sensor Stapler bed Assembly PSRetainer Retainer Sensor Stapler bed Assembly PSBinFull Output Bin Full Sensor Stapler bed Assembly PSNBinFull Next Bin Full Sensor Housing STLout Staples Out Stapler Assembly SW1 Top Cover Interlock Switches (2 in serial) Right Hinge