7-bin Tabletop Mailbox 1 With the printer turned off and unplugged (A), disconnect the C-link cable from the top and bottom (B) connectors. 2 Remove the Face-up Bin (A) from the top slot of the mailbox. Depress the handle mechanism on the front of the mailbox (B). Pull the mailbox away from the printer until the tray is fully extended (C). 3 Release the plastic alignment guide from the latching mechanism. 4 Remove the wingnuts from the studs beneath the tray extension on the stand. 5 Slide the mailbox away from the printer. Raise the alignment guide and tape it in place before moving the mailbox. C4085-91087 User Installable Accessories 157