To Reinstall: CAUTION Be careful not to damage the Standard Output Bin Full sensor flag (figure 6-11, callout 4) when replacing the top cover. 1 Hold the top cover door up and the Standard Output Bin (figure 6-10, callout 6) down while lowering the cover into position. 2 Slide the Standard Output Bin under the Standard Output Bin Full sensor flag, and make sure that the cam (figure 6-11, callout 4) at the rear of the top cover door is properly positioned while lowering the top cover into place. 3 Make sure that the top cover is seated properly and that the retaining tabs are in place before replacing the screws. C4085-91087 Engine Removal and Replacement 173