Fan 3, Formatter Fan and Housing (Intake) Fan Motor Figure 6-22 Fan 3, Formatter Fan Note The fan motor (FM3) can be removed without removing the housing assembly. 1 Remove the back cover (see figure 6-6 on page 167). 2 Unplug the fan connector (figure 6-22, callout 1). CAUTION Do not bend the fan retainer clips upward. Release them by pinching. 3 Release the 2 retainer clips (figure 6-22, callout 2), and slide the fan out of the housing assembly. Fan Housing 4 Remove 2 screws and remove housing. To Reinstall: Make sure that the fan cable exits from the upper left corner. C4085-91087 Engine Removal and Replacement 185