Figure 6-32 Feeder Assembly (2 of 2) 8 Remove 1 screw at the back of the Feeder Assembly (figure 6-32). Note Removing the High Voltage Power Supply is recommended to ease the removal of the Feeder Assembly, primarily because of the contact points. 9 Release 4 plastic retaining tabs by moving them in the directions indicated in figure 6-32 while carefully lifting upwards on the Feeder Assembly. 10 Remove the Feeder Assembly by lifting it upwards out of the Toner Cartridge cavity. To Reinstall: Make sure that the plastic retaining tabs are all properly seated before replacing the screws. C4085-91087 Engine Removal and Replacement 195