Main Motor Assembly Figure 6-39 Main Motor 1 Remove the back cover (see figure 6-6 on page 167). 2 Remove the HVPS (see figure 6-49 on page 215). 3 Unplug the connector (figure 6-39, callout 1). CAUTION Be careful when removing the Main Motor. The steel drive shaft can damage the plastic gears. 4 Remove 4 screws (figure 6-39, callout 2). To Reinstall: Align the Main Motor to the chassis with the locator tab (figure 6-39, callout 3) and the machined ring around the output shaft. C4085-91087 Engine Removal and Replacement 205