High Voltage Power Supply (HVPS) Figure 6-49 High Voltage Power Supply 1 Remove the back cover (see figure 6-6 on page 167). 2 Unplug the cable from the LVPS to the DC Controller PCA (figure 6-49, callout 1), and move it out of the way. 3 Unplug the connector from the bottom of the HVPS (figure 6-49, callout 2). Note Do NOT remove the screw indicated in Figure 6-49, beneath the null symbol 4 Remove 1 self-tapping screw (figure 6-49, callout 3) and 3 screws (figure 6-49, callout 4). To Reinstall: Make sure that the plastic alignment pin (figure 6-49, callout 5), the connector pins, and the high voltage contacts are properly aligned before replacing the screws.
C4085-91087 Engine Removal and Replacement 215