Paper Tray 1 Open the paper tray on the 2000-sheet Input Tray and remove any unused paper. 2 Remove the Vertical Transfer Unit (VTU) from the 2000-sheet Input Tray (see figure 6-76). 3 Remove the Left and Right Covers from the 2000-sheet Input Tray (see figure 6-64 and figure 6-65). Figure 6-67 2000-sheet Input Tray Paper Tray 4 Remove the 2 screws and metal retaining tabs from the sides of the unit’s chassis: 1 screw and retaining tab on each side of the chassis (figure 6-67, callout 1). 5 Slide the paper tray straight out of the chassis while carefully supporting the rear of the paper tray. To Reinstall:
1 Make sure that the retaining tabs are tightly secured to the unit’s chassis (figure 6-67, callout 1). 2 After replacing the tray, print a test page. If the print is too close to the paper’s edge, adjust the tray. C4085-91087 2000-sheet Input Tray Removal and Replacement 239