Power Supply 1 Remove the Back and Left Covers from the 2000-sheet Input Tray (see figure 6-63 and figure 6-64). Figure 6-72 2000-sheet Input Tray Power Supply 2 Locate the cable that runs from the Controller PCA on the 2000-sheet Input Tray to the unit’s Power Supply (Figure 6-72, callout 1). Disconnect the cable from the Power Supply by pushing on the retaining tab that is located behind the cable connector (callout 2). 3 Remove the 2 screws that secure the Power Supply to the chassis (callout 3). 4 Lift the Power Supply upward to clear the locating tabs underneath, and then slide the Power Supply to the left to free it from the chassis (callout 4).
248 Chapter 6 Removal and Replacement C4085-91087