Casters and Stabilizing Feet 1 Remove the printer from the 2000-sheet Input Tray. Figure 6-79 2000-sheet Input Tray Casters 2 Tip the 2000-sheet Input Tray onto its left side. 3 Locate the 4 Casters, 1 on each corner of the chassis (Figure 6-79, callout 1). 4 Remove a Caster by removing the 2 screws that hold the Caster to the chassis (callout 2). Note To remove the stabilizing feet press as shown in callout 3, and release the stabilizing feet. To Reinstall: 1 Tighten the screws securely when reinstalling each caster (callout 2). C4085-91087 2000-sheet Input Tray Removal and Replacement 259