From the Control Panel Note To set the paper type for Tray 1, set TRAY 1 MODE=CASSETTE from the Paper Handling Menu. 1 From the Paper Handling Menu, press I TEM to select a specific tray. 2 Press + until you get to the correct type of media. 3 Press S ELECT . 4 Repeat this step for each paper tray. 5 Press G O . 6 From inside your application, choose the page setup option for that application. 7 Select the paper source / type option. 8 Select the correct media source / type for the first page. 9 Select the correct media source / type for all other pages.
Note You must have the HP LaserJet 8000 printer selected in your application in order for your application to provide you with the correct paper tray and media type selections. CAUTION Do not make changes to the driver unless the application does not provide this option. Print job settings selected through your application always override settings made through the printer driver. Printer settings made in the application or print driver always override the corresponding setting made on the printer Control Panel. 10 Print the document. C4085-91087 General Troubleshooting Information 385