Paper Path Test Using the error trend information from “Display” on page 391, you can verify a specific printer paper path with the paper path test. You must first set the desired paper destination in the configuration menu and then select the paper path test. The paper path test menu will allow you to select the desired paper source and number. Note Feeding paper from Tray 1 will not allow the user to send paper to the Face-down output bins during this test. Note If the 8-bin Mailbox is installed, in order to perform the paper path test, the printer must be configured to mailbox mode.
If the printer is not in mailbox mode, ask the network administrator to change the configuration to mailbox mode to complete this test. To perform a paper path test: 1 Press M ENU until INFORMATION MENU appears. 2 Press I TEM until PRINT PAPER PATH TEST appears. 3 Press S ELECT . 4 Press + or - until the desired input tray appears. 5 Press S ELECT . 6 Press + or - until the desired output bin appears. 7 Press S ELECT . 8 Press + or - until the desired duplex mode appears. 9 Press S ELECT . 10 Press + or - to choose the desired number of copies. 11 Press S ELECT . 398 Chapter 7 Troubleshooting C4085-91087