Table 7-6. Engine Error Messages (continued) C4085-91087 Printer Messages 405 Control Panel Message Event Log Error Message Description Recommended Action 13.3 PAPER JAM CHECK RIGHT DOOR alternates with THEN OPEN AND CLOSE TOP COVER 13.3 XX Paper delay jam. Paper did not reach PS1 at the registration area. 1. Remove the toner cartridge, lift the green handle, and verify the sensor flag operation. 2. Make sure that the sensor is not broken. 3. Replace the registration assembly if necessary. See “Registration Assembly” on page 217 for instructions. 13.5 FUSER OUTPUT, PAPER STOPPED JAM 13.5 XX Fuser output, paper late jam. Paper never reached PS1403 at the fusing assembly.
Remove the toner cartridge, and check the path between the registration and fusing assemblies. PS1403 on the sensor PCA may be faulty. 13.6 FUSER OUTPUT PAPER STOPPED JAM 13.6 XX PS1402 did not sense the paper. Fuser output, paper stopped jam. Paper never exited the fusing assembly. 1. Check the fuser flag at the sensor board area. 2. Check the fuser access door. 3. Make sure that the flag is not broken. PS1403 on the sensor PCA, or the delivery exit spring gears, may be faulty. 13.9 CHECK LEFT DOOR 13.9 XX Face-down bin paper late jam. Paper did not arrive at PS1402 when expected. Inspect the path between the fuser and delivery assemblies. Check the diverter assembly.
13.20 PAPER JAM CHECK ... 13.20 XX The engine could not eject a page in the printer .The front panel message (...) will indicate the sensor closest to the paper. Remove the jam from the location indicated on the control panel. 13.A PAPER JAM CHECK LEFT DOOR 13.A XX Paper stopped at the Face-down bin. Check the paper path. This jam is sensed by PS1402 on the sensor PCA. 20 INSUFFICIENT MEMORY alternates with PRESS GO TO CONTINUE Error The printer received more data than can fit in its available memory. You might have tried to transfer too many macros, soft fonts, or complex graphics. 1. Press GO to print the transferred data (some data might be lost). 2.
Simplify the print job, or install additional memory.