Table 7-6. Engine Error Messages (continued) C4085-91087 Printer Messages 413 Control Panel Message Event Log Error Message Description Recommended Action CHECK OUTPUT DEVICE alternates with CLOSE OUTPUT DELIVERY PATH Error The paper path between the printer and the external paper handling output device is open and must be closed before printing can continue. Close the paper path. EXTERNAL DEVICE INITIALIZING Status When an external paper handling device is connected to the printer, it must have 10 seconds to initialize after boot or after coming out of power save mode. No action required. MANUALLY FEED [SIZE] Error Tray 1 does not contain the specified size paper.
Load the specified type of paper into Tray 1. MANUALLY FEED [TYPE] [SIZE] Error One of the following occurred: • A manual feed was requested. • There is no paper in Tray 1. • The wrong size paper is loaded. • The control panel is not set for the kind of paper loaded. 1. Load the requested paper into Tray 1. 2. Press GO if the desired paper is already loaded in Tray 1. 3. Press - VALUE + to scroll through the available types and sizes. 4. Press SELECT to accept the alternate type or size. MANUALLY FEED [TYPE] ENV Error Tray 1 does not contain the specified type of envelope. Load the specified type of envelope into Tray 1.
MANUALLY FEED TRAY 1 ENVELOPE Error Tray 1 does not contain an envelope. Load an envelope into Tray 1. OUTPUT BIN FULL alternates with CLEAR PAPER FROM [BINNAME] Error The output bin is full and needs to be emptied. 1. Remove the media from the bin. 2. Make sure that the sensor flag moves freely. TRAY X CONTAINS UNKNOWN MEDIA Warning The media type in the specified tray cannot be determined. Load known media, or set the correct media type.