Operating Environment The electrical specifications listed in Chapter 1 must be maintained to ensure proper operation of this printer. Consider the following points before installing the printer. G Install the printer in a well-ventilated, dust-free area, away from any open windows. G Install the printer on a hard, flat and continuous surface, with all four printer feet level. Do not install on carpet or other soft surfaces. G Ensure adequate, stable power is supplied. Printer power requirements are listed in table 1-6, “Electrical Specifications,” on page 9.
G Install the printer where there is stable temperature and humidity, away from water sources, humidifiers, air conditioners, refrigerators, or other major appliances (see table 2-1 on page 49). G Install the printer away from direct sunlight, open flames, or ammonia fumes. If the printer is placed near a window, make sure the window is closed and has a curtain or blind to block any direct sunlight. G Install the printer with enough space around the printer for proper access and ventilation (see figure 2-1 on page 47). G Install the printer away from the direct flow of exhaust from air ventilation, heating, or air conditioning systems. 46 Chapter 2 Site Requirements C4085-91087