Resetting the Printer Cold Reset Cold Reset clears all data from the printer memory and sets all the defaults (except Service Mode settings) back to the factory settings. CAUTION Performing a Cold Reset resets the JetDirect configuration. To avoid making changes to your configuration, remove the JetDirect card before performing a Cold Reset. If possible, print a Configuration Page prior to performing a Cold Reset. This will document current settings for later reference. To perform a Cold Reset: 1. Turn off the printer. 2 While pressing G O , turn the printer on. COLD RESET appears briefly on the display, then INITIALIZING appears.
After a few seconds, RESTORING FACTORY SETTINGS appears on the display, followed by OFFLINE . The Cold Reset is complete. 3. Press G O to return the printer online. READY appears on the display. Setting the Display Language 1 Press and hold S ELECT while powering on. Hold S ELECT until SELECT LANGUAGE appears. 2 Release S ELECT . INITIALIZING appears briefly. Wait for LANGUAGE=ENGLISH to appear. 3 Press + repeatedly until the desired language appears. 4 Press S ELECT to save your choice. An asterisk (*) will appear beside your language selection. C4085-91087 Resetting the Printer 55