Control Panel Menus Press M ENU to cycle through the control panel menus. Each menu is described in a separate table in this section. Figure 7-11 on page 462 provides a map of all the menus and their associated items. Menu items are displayed only if their associated option is installed, or their function is activated. All menus and their associated items are accessible when the printer is online. In menu mode, if no keys are pressed for approximately 30 seconds, the system will automatically return to the top level and display either an existing error, or one of the following: G READY , if the printer was online. G OFFLINE , if the printer was offline.
To select a menu item 1 Press M ENU repeatedly until the desired menu appears. 2 Press I TEM repeatedly until the desired item appears. 3 Press + repeatedly (or hold down + to scroll) until the desired setting appears. 4 Press S ELECT to save the selection. An asterisk ( * ) appears next to the selection, indicating that it is now the default. 5 Press M ENU or G O to exit the menus. Note Shaded items appear only if the associated option or function is activated. 58 Chapter 3 Operating Overview C4085-91087