beckhoff TF5200 — 2.3 Combination of functions “Insert motion stops during processing” and real-time loops

Description 2.2.2 DISTANCE mode application In multichannel machining, where the resulting geometry is created by superimposing individual channels, it may be necessary to stop one channel while the other channel(s) continue machining. An example of this is a machining operation with two channels working in planes perpendicular to each other. The figure below shows the movement of the first channel superimposed by an orbiting movement about the Z axis of the second channel. Fig. 12: DISTANCE mode application Process-controlled, the same geometry is traversed several times with different process settings.

Each process setting requires STOPs in the first channel (discs in the figure), while the second channel continues orbiting until a sufficient quality is reached. The "Insert stop marks" function offers the option to set the discs for the current process setting at the start of each process setting marking the start of the program. Due to the 2D motion of the channel, equidistant discs can be inserted in the program using the distance traversed.

2.3 Combination of functions “Insert motion stops during processing” and real-time loops When combining the "Insert motion stops during machining" function with "Distance" mode and the real-time loops function when using the "MODULO" option, the following special features must be considered: An absolute commanded stop is only possible within the current loop or after exiting the loop. A relative one-time stop in a future loop that is not reached by a premature exit is rejected. Insert stop command 20 Version: 1.141 TF5200 | TwinCAT 3 CNC