Description Warnings, errors and reactions Warning P-ERR-50721: When the monitor is active, the absolute offset limits are reached. The warning is output only if P-MANU-00014 is configured accordingly. р Move back within the valid range. 3. Interpolation is stopped. Warning P-ERR-110570 or P-ERR-110571: The positive or negative absolute offset limits configured are located outside the software limit switches. 1. Incorrectly configured absolute offset limits are set automatically to the software limits switches. Error message P-ERR-50041 or P-ERR-50042: With G201, software limits switches are exceeded. 2. Interpolation is stopped. р Reset the controller. р Move back within the valid range.
The valid range is defined by the software limit switches. 1. Interpolation is not stopped. The current axis position is outside the absolute offset limits (analogous to warning P-ERR-50721). р Move back within the valid range. Manual mode offset limits 14 Version: 1.082 TF5200 | TwinCAT 3 CNC