7. EtherNet/IP Connection Procedure 7.2. Setting up the FZ5 Sensor Controller Set up the FZ5 Sensor Controller. 7.2.1. Parameter Settings Set the parameters for the FZ5 Sensor Controller. 13 1 Check the positions of the connectors on the FZ5 Sensor Controller by referring to the right figure. 2 As shown in Section 5.2. Device FZ5 Sensor Controller Configuration, connect the USB mouse Camera, Monitor, USB mouse, LAN cable 24 VDC power supply (For FZ5 Monitor Sensor Controller), and LAN 24 VDC power supply cable to the FZ5 Sensor Controller. Camera Connect the 24 VDC power 24 VDC power supply supply (For Monitor) to the Monitor.
3 Connect the FZ5 Sensor Controller to the Switching hub LAN cable with the LAN cable. Connect the 24 VDC power supply (For Switching hub) to 24 VDC power supply the Switching hub. 4 Turn ON the power supply to the FZ5 Sensor Controller and the Monitor.