Installation options Various installation possibilities are available. Individual appliances with partition These are only limited by the kitchen design. Individual appliance Side-by-Side When dimensioning the partition for model 4, note the thickness of the door panels to prevent damage if the doors are opened at the same time. Use the Heater Kit for Side-by-Side Installation if the gap between the appliances is less than 6" (160 mm). See the section on “Required accessories and tools/ Optional accessories”. Minimum thickness of the partition 5 / 8 " (16 mm). Individual appliance at the end of the kitchen If one side of the appliance is visible, a side panel must be used.
If two appliances are set up next to each other, a sealing kit for Side-by-Side combination should be used in order to guarantee a stable connection. The side panel must be connected firmly to the wall, the floor and overhead cabinet/fixtures before the appliance is placed in the installation niche. For further information see section “Required accessories and tools”. The dimensions of the side panel are taken from the opposite installation niche wall. During installation ensure that the installation niche is square and the proper size. 6