2 Select TracBack Map The blue triangle represents your location on the map. As you travel, the icon moves and leaves a track log (trail). Waypoint names and symbols appear on the map. When you are navigating to a destination, your route is marked with a magenta line on the map. When the map orientation is Track Up , objects on the map appear to rotate around your position. As you travel, the entire map reorients in the direction you are facing. You can stabilize the objects by setting the orientation to North Up ( page 13 To open the map, select The map page opens with your route marked with a magenta line. 3 Navigate using the map ( page 11 ) or the compass ( page 11 Changing the Track Color 1 Select > Track Manager 2 Select a track. 3 Select Set Color 4 Select a color. Saving the Current Track 1 Select > Track Manager 2 Select a track. 3 Select an option:
Measuring Distance on the Map You can measure the distance between two points. 1 From the map, select a location. 2 Select > Measure Distance > Use 3 Move the pin to another location on the map. To save the entire track, select Save Track To save part of the track, select Save Portion , and select the part to save. Saving a Location on a Track 1 Select > Track Manager 2 Select a track. 3 Select View Map 4 Select a location along the track. 5 Select the information bar along the top of the screen. 6 Select 7 Select OK Compass The handheld device has a 3-axis, tilt-compensated compass. You can use a bearing pointer or a course pointer to navigate to your destination. Calibrating the Compass NOTICE Calibrate the electronic compass outdoors. To improve heading accuracy, do not stand near objects that influence magnetic fields, such as vehicles, buildings, and overhead power lines. Clearing the Current Track Select > Track Manager > Current Track > Clear Current Track You should calibrate the compass after moving long distances, experiencing temperature changes, or removing the battery. 1 Select > Compass > > Calibrate Compass > Start 2 Follow the on-screen instructions. Deleting a Track 1 Select > Track Manager 2 Select a track. 3 Select Delete > Yes Navigating with the Bearing Pointer When navigating to a destination, the bearing pointer points to your destination, regardless of the direction you are moving. 1 While navigating to a destination, select > Compass 2 Turn until points toward the top of the compass, and Archiving a Saved Track You can archive saved tracks to save memory space. 1 Select > Track Manager 2 Select a saved track. 3 Select Archive continue moving in that direction to the destination. Course Pointer The course pointer is most useful if you are navigating on water or where there are no major obstacles in your path. It also helps you avoid hazards to either side of the course, such as shoals or submerged rocks. To enable the course pointer, from the compass, select > Setup Heading > Go To Line/Pointer > Course (CDI) Archiving Tracks Automatically 1 Select Setup > Tracks > Auto Archive 2 Select an option. Sending and Receiving Data Wirelessly Before you can share data wirelessly, you must be within 10 ft. (3 m) of a compatible Garmin device. You can share waypoints, geocaches, routes, and tracks wirelessly. For information on sharing dog track and train codes wirelessly, see page 3 1 Select > Share Wirelessly 2 Select Send or Receive 3 Follow the on-screen instructions. The course pointer А indicates your relationship to the course line leading to the destination. The course deviation indicator (CDI) Б provides the indication of drift (right or left) from the course. T The scale В refers to the distance between dots Г on the course deviation indicator, which tell you how far off course you are. Navigation You can navigate routes and tracks, to a waypoint, geocache, photo, or any saved location in the device. You can use the map or the compass to navigate to your destination. Navigation 11