Managing Presets You can customize the pre-loaded presets and edit presets you created. 1 From a compatible screen, select Menu > > Manage . 2 Select a preset. 3 Select an option: To rename the preset, select Rename , enter a name, and select Done . To edit the preset, select Edit , and update the preset. To delete the preset, select Delete . To reset all presets to factory settings, select Reset All . Setting the Vessel Type You can select your boat type to configure the chartplotter settings and to use features customized for your boat type. 1 Select Settings > My Vessel > Vessel Type . 2 Select an option. Adjusting the Backlight 1 Select Settings > System > Display > Backlight .
2 Adjust the backlight. TIP: From any screen, press repeatedly to scroll through the brightness levels. This can be helpful when the brightness is so low you cannot see the screen. Adjusting the Color Mode TIP: Select > Color Mode from any screen to access the color settings. 2 Select an option. 1 Select Settings > System > Sounds and Display > Color Mode . Turning On the Chartplotter Automatically You can set the chartplotter to turn on automatically when the power is applied. Otherwise, you must turn on the chartplotter by pressing . Select Settings > System > Auto Power Up . NOTE:
When Auto Power Up is On, and the chartplotter is turned off using , and power is removed and reapplied within less than two minutes, you may need to press to restart the chartplotter. Enabling Screen Lock For anti-theft protection and to prevent unauthorized use of your device, you can enable the Screen Lock feature which requires a PIN (Personal Identification Number). When enabled, you must enter the PIN to unlock the screen each time you turn on the device. You can set up recovery questions and answers as prompts in case you forget the PIN. NOTICE If you enable the Screen Lock feature, Garmin Support cannot retrieve the PIN or access your device.
It is your responsibility to provide the PIN to anyone authorized to use the vessel. 1 Select Settings > System > Sounds and Display > Screen Lock > Setup . 2 Enter a memorable numeric PIN of 6 digits. 3 Reenter the PIN to verify. 4 When prompted, choose and answer three PIN recovery questions. You can Disable or Reset the PIN and recovery questions as needed. Customizing the Chartplotter 13