Getting Started Mounting the Device WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. WARNING This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat, remove the device from the vehicle when exiting or store it out of direct sunlight. 1 Connect the device to vehicle power ( page 1 ). 2 Mount the device ( page 1 ). 3 Register the device ( page 3 ). 4 Check for updates. Software updates ( page 3 ). Free map update ( page 3 ).
Notice Before mounting the device, see the Important Safety and Product Information guide for information about laws pertaining to windshield mounting. Charge your device as you drive before using it on battery power. 1 Plug the vehicle power cable ➊ into the USB port ➋ on the device. 2 Press the suction cup ➌ to the windshield. 3 While pressing, flip the lever ➍ back toward the windshield. 4 Snap the mount ➎ onto the suction cup. nьvi 30/40/50 Owner’s Manual 1