If your product model includes traffic data, the vehicle power cable included with your device is traffic-compatible. When you are within a traffic coverage area, your device can display traffic information and help you avoid traffic delays. 7 From the list of Bluetooth devices, select your Garmin Drive device name. TIP: the Bluetooth name for your Garmin Drive device appears on the Garmin Drive screen. You must select the device name indicated for your smartphone operating system. 8 Respond to the on-screen prompts to complete the pairing process. Traffic Receiver Subscriptions A regional traffic data subscription is included with most traffic receivers.
You can add subscriptions for additional regions to your traffic receiver. For more information, go to garmin.com /traffic . Viewing traffic subscriptions Disconnecting from Smartphone Link You can temporarily disconnect or permanently unpair your phone. Your device does not receive data from the Smartphone Link app while your phone is disconnected. 1 Select Apps > Smartphone Link > . 2 Select your phone name. 3 Select an option: Select Settings > Traffic > Subscriptions . Adding a subscription You can purchase traffic subscriptions for other regions or countries. 1 Select Settings > Traffic . 2 Select Subscriptions > . 3 Write down the FM traffic receiver unit ID.
4 Go to www.garmin.com/fmtraffic to purchase a subscription and get a 25-character code. The traffic subscription code cannot be reused. You must obtain a new code each time you renew your service. If you own multiple FM traffic receivers, you must obtain a new code for each receiver. 5 Select Next on the device. 6 Enter the code. 7 Select Done . To temporarily disconnect your phone from your device, clear the Smartphone Link tick box. When you want to receive Smartphone Link data again, you must select the tick box to enable your device to connect to Smartphone Link. To permanently unpair your phone from your device, select Unpair device .
Your phone is no longer authorised to connect to your device. If you want to connect to your phone in the future, you must pair your phone and device again. If you unpaired your phone, you should open your smartphone Bluetooth settings and remove your Garmin Drive device from the list of paired devices. This can help to prevent problems if you want to pair the devices again in the future. See your smartphone owner's manual for more information about removing paired devices. Receiving Traffic Data Using Smartphone Link NOTE: smartphone Link traffic data is available only for product models ending in MT-S. Your device can receive subscription-free traffic data through the Smartphone Link app.
1 Connect your device to Smartphone Link ( Connecting to Enabling traffic You can enable or disable traffic data. 1 Select Settings > Traffic . 2 Select the Traffic tick box. Smartphone Link , page 11 ). 2 On your Garmin Drive device, select Settings > Traffic and verify the Traffic tick box is selected. Viewing traffic on the map Connecting to Smartphone Link You must pair your Garmin Drive device with your phone and connect to Smartphone Link to use some features, such as live traffic and parking information. After the devices are paired, they connect automatically when they are turned on and within range.
1 On your smartphone, install the Garmin Smartphone Link The traffic map shows colour-coded traffic flow and delays on nearby roads. 1 From the main menu, select Apps > Traffic . 2 If necessary, select > Legend to view the legend for the traffic map. Searching for traffic incidents 1 From the main menu, select Apps > Traffic . 2 Select > Incidents . 3 Select an item in the list. 4 If there is more than one incident, use the arrows to view additional incidents. app. To find the Smartphone Link app, you can search in the app store on your smartphone, or go to garmin.com /smartphonelink . 2 On your Garmin Drive device, select Apps > Smartphone Link > Connect .
3 On your smartphone, open the Garmin Smartphone Link app, and accept the licence agreement. 4 Select an option: Using the apps ® smartphone, respond to the on-screen prompts to complete the pairing process. If you are pairing with a smartphone with Android , complete steps 5-8. 5 On your smartphone with Android, select Bluetooth If you are pairing with an Apple Viewing the Owner's Manual on Your Device You can view the complete owner's manual on the device screen in many languages. 1 Select Apps > Owner's Manual . The owner's manual appears in the same language as the software text ( Language and Keyboard Settings , page 13 ). 2 Select to search the owner's manual (optional).
® settings for your smartphone appear. 6 If necessary, select the option to search or scan for nearby devices. Settings . The Bluetooth Using the apps 11