Installing the Fist Microphone and Mount Before you can attach the fist microphone mount to your dashboard, you must select a suitable location on the dashboard. WARNING It is your responsibility to ensure the mounting location complies with all applicable laws and ordinances, and does not block your view of the road during the safe operation of your vehicle. NOTICE Avoid wires, gauges, air bags, air bag covers, heating, ventilation, and air conditioning and other items when drilling pilot holes and attaching the mount to the vehicle. Garmin is not responsible for any damages or consequences arising from the installation. NOTE: this feature is not available on all product models.
1 Align and insert the connector on the fist microphone onto the Group Ride mount. 2 Tighten the collar around the connected cable. 3 Place the mount on the selected location. 4 Using the mount as a template, mark the three screw locations. 5 Drill pilot holes (optional). For some types of mounting material, drilling pilot holes is necessary. 8 Installation