Using the audio mixer You can use the audio mixer to set the relative volume levels for different audio sources, such as navigation prompts, voice-activated feature responses or alerts. The level for each audio type is a percentage of the master volume. 1 Select Volume > Audio Mixer . 2 Use the slider bars to adjust the relative volume for each audio source. For example, when a slider bar is set to the far right position, that audio source plays at the master volume level. When a slider bar is set to the centre position, it plays at half the master volume level.
Enabling or Disabling Sounds and Audio Sources You can turn specific audio sources and system sounds on or off without affecting other audio sources. 1 Select Volume . 2 In the Sounds section, select an option: To enable the device to speak navigation prompts and directions, select the Spoken Navigation check box. To enable the device to say traffic alerts and prompts, select the Spoken Traffic Alerts check box. To enable the device to play a tone when a driver awareness alert is triggered, select the Alerts and Tones check box. To enable the device to play a sound when you touch on-screen buttons, select the Button Presses check box.
To enable the device to play a tone when it starts listening to a voice request, select the Start of Request Sound check box. When you press the voice button or say OK, Garmin or Alexa , the device plays a tone to indicate it is listening for your request. To enable the device to play a tone when it stops listening to a voice request, select the End of Request Sound check box. The device plays a tone when it detects you have stopped speaking, and it starts processing your voice request. Adjusting the screen brightness 1 Select Settings > Display > Brightness . 2 Use the slider bar to adjust the brightness. Getting started 11