Garmin ® Trolling Motor Functions Before you can use voice commands to control your Garmin trolling motor, you must connect the chartplotter to the trolling motor ( Connecting to a Trolling Motor , page 130 ).
Garmin Boat Switch Digital Switching Functions Controlling the Chartplotter GPSMAP® 8400/8600/8700 Series Owner's Manual 31 Voice Command Function Show Real View Forward Opens the RealVü forward sonar screen Increase Sonar Forward Range Increases the sonar forward range Decrease Sonar Forward Range Decreases the sonar forward range Sonar Forward Range Automatic Sets the sonar forward range to adjust automatically Increase Sonar Depth Range Increases the sonar depth range Decrease Sonar Depth Range Decreases the sonar depth range Sonar Depth Range Automatic Sets the sonar depth range to adjust automatically Voice Command Function Anchor Lock Enabled Turns on and sets anchor lock Disengage Anchor Lock Disengages and turns off anchor lock Cruise Control On Turns on and engages cruise control Disable Cruise Disengages and turns off cruise control Set Cruise to 3 Knots Adjusts the cruise control speed to the spoken value Turn to Starboard Uses the trolling motor to turn the vessel to the starboard (right) side Step Turn Left Uses the trolling motor to make a small step turn to the left (port) Set Heading Hold Engages heading hold Disable Heading Hold Disengages heading hold Jog Left Adjusts the position of the vessel slightly left (port) when in anchor lock Bump Port Adjusts the position of the vessel slightly port (left) when in anchor lock Jog Front Adjusts the position of the vessel slightly forward when in anchor lock Adjust Backward Adjusts the position of the vessel slightly backward when in anchor lock Prop On Turns on the propeller Motor Off Turns off the trolling motor Speed Up Increases the trolling motor propeller speed one level Speed Up by 3 Increases the trolling motor propeller speed three levels Slow down Decreases the trolling motor propeller speed one level Set Speed to 10 Sets the trolling motor propeller speed to level 10 Speed to Half Sets the trolling motor propeller to half of full speed Speed to Full Sets the trolling motor propeller to full speed Turbo Sets the trolling motor propeller speed to turbo Voice Command Function Turn on the Anchor Lights Turns on the digital switch assigned to the anchor lights White Light Off Turns off the digital switch assigned to the white light, which may be referred to as the anchor light Start Bilge 1 Turns on the digital switch assigned to the first bilge pump Stop Bilge 1 Turns off the digital switch assigned to the first bilge pump Run Bilge 3 Continuously Turns on and runs the digital switch assigned to the third bilge pump in a manner where it will not turn off automatically Set Primary Light to 80 Adjusts the brightness of the digital switch assigned to the primary light Switch off Light 3 Turns off the digital switch assigned to the third light Turn On Light 1 Turns on the digital switch assigned to the first light