Deleting a Paired Phone You can delete a paired phone to prevent it from automatically connecting to your device in the future. 1 Select Settings > Wireless Networks . 2 Select the phone, and select Unpair device . When you are within a traffic coverage area, your device can display traffic information and help you avoid traffic delays. Traffic Receiver Subscriptions A regional traffic data subscription is included with most traffic receivers. You can add subscriptions for additional regions to your traffic receiver. For more information, go to garmin.com /traffic .
Traffic Viewing Traffic Subscriptions NOTICE Garmin is not responsible for the accuracy or timeliness of the traffic information. Select Settings > Traffic > Subscriptions . Adding a Subscription You can purchase traffic subscriptions for other regions or countries. 1 From the main menu, select Traffic . 2 Select Subscriptions > . 3 Write down the FM traffic receiver unit ID. 4 Go to www.garmin.com/fmtraffic to purchase a subscription and get a 25-character code. The traffic subscription code cannot be reused. You must obtain a new code each time you renew your service. If you own multiple FM traffic receivers, you must obtain a new code for each receiver. 5 Select Next on the device.
6 Enter the code. 7 Select Done . Your device can provide information about traffic on the road ahead or on your route. You can set your device to avoid traffic when calculating routes, and to find a new route to your destination if a large traffic delay occurs on your active route ( Traffic Settings , page 19 ). The traffic map allows you to browse the map for traffic delays in your area. To provide traffic information, your device must be receiving traffic data. Your device receives subscription-free traffic data through the Smartphone Link app ( Receiving Traffic Data Using Smartphone Link , page 14 ).
All product models can receive traffic data using an over-the- air traffic receiver cable accessory ( Receiving Traffic Data Using a Traffic Receiver , page 14 ). Go to your product page at garmin.com to find and purchase a compatible traffic receiver cable accessory. Product models ending in -D or HD can receive traffic data using the built-in digital traffic receiver and the included vehicle power cable ( Receiving Traffic Data Using a Traffic Receiver , page 14 ). Traffic data is not available in all areas. For information about traffic coverage areas, go to www.garmin.com/traffic . Enabling Traffic You can enable or disable traffic data. 1 Select Settings > Traffic .
2 Select the Traffic check box. Viewing Traffic on the Map Receiving Traffic Data Using Smartphone Link Your device can receive subscription-free traffic data through the Smartphone Link app. 1 Connect your device to Smartphone Link ( Pairing with Your The traffic map shows color-coded traffic flow and delays on nearby roads. 1 From the main menu, select Apps > Traffic . 2 If necessary, select > Legend to view the legend for the traffic map. Phone and Connecting to Smartphone Link , page 11 ). 2 On your Garmin DriveSmart device, select Settings > Searching for Traffic Incidents 1 From the main menu, select Apps > Traffic . 2 Select > Incidents . 3 Select an item in the list.
4 If there is more than one incident, use the arrows to view additional incidents. Traffic , and verify the Traffic check box is selected. Receiving Traffic Data Using a Traffic Receiver NOTICE Heated (metallized) windshields could degrade the performance of the traffic receiver. Voice Command NOTE: Voice command is not available for all languages and regions, and may not be available on all models. NOTE: Voice Activated Navigation may not achieve desired performance when in a noisy environment. Voice command allows you to use your device by saying words and commands. The voice command menu provides voice prompts and a list of available commands.
A traffic receiver receives traffic data from an over-the-air broadcast signal, where available. An over-the-air traffic receiver cable is available as an accessory for all product models. Go to your product page at garmin.com to find and purchase a compatible traffic receiver cable accessory. Traffic data is not available in all areas. Connect the device to vehicle power using the traffic receiver cable ( Mounting and Powering the Garmin DriveSmart Device in Your Vehicle , page 1 ). NOTE: If your product model ends with LMT-D or LMTHD, you should use the power cable included with your device. The power cable has an integrated antenna for the built-in digital traffic receiver.
Where available, the digital traffic receiver receives traffic data from FM radio stations using HD Radio technology. Setting the Wakeup Phrase The wakeup phrase is a word or phrase you can say to activate voice command. The default wakeup phrase is Voice Command. TIP: You can reduce the chance of accidental voice command activation by using a strong wakeup phrase. 1 Select Apps > Voice Command > > Wake Up Phrase . 2 Enter a new wakeup phrase. 14 Traffic