B asic O peration > B asic O peration Creating Waypoints Using the Map You can quickly create a waypoint using the Map Page. When you pan the map and move the arrow over a map item, you see a highlighted description of the item. To create a waypoint using the Map Page: 1. On the Map Page, use the ROCKER to move the pointer to the map item you want to mark as a waypoint. Information page for a map point with data Information page for a map point without data 2. Press and quickly release ENTER to capture that location and open the information page for the map item. 3. Highlight Save , and press ENTER .
Creating a Waypoint Using Coordinates You can manually enter location coordinates to create a waypoint. This method is useful for creating a waypoint at a specific latitude/longitude position from a chart. If the map item selected contains no information, a “No map information at this point. Do you want to create a user waypoint here?” message appears. Highlight Yes , and press ENTER . 4. To change any information on the Waypoint To create a new waypoint by entering location coordinates: 1. Create a new waypoint, press MARK . Page, highlight the appropriate field, and press ENTER to open the on-screen keypad. After entering and confirming your changes, highlight OK , and press ENTER . 2.
On the Waypoint Page, highlight the Location field, and press ENTER to open the on-screen keypad. GPSMAP 60CSx Owner’s Manual 11