Getting Started with the ActiveCaptain App You can connect a mobile device to the ECHOMAP UHD device using the ActiveCaptain app. The app provides a quick and easy way for you to interact with your ECHOMAP UHD device and complete such tasks as sharing data, registering, updating the device software, and receiving mobile device notifications. 1 Insert a memory card in one of the ECHOMAP UHD device's card slots ( Inserting Memory Cards , page 5 ). Be sure the card is inserted each time you want to use the ActiveCaptain feature. 2 Select ActiveCaptain > Create ActiveCaptain Memory Card . NOTICE You might be prompted to format the memory card.
Formatting the card deletes all information saved on the card. This includes any saved user data, such as waypoints. Formatting the card is recommended, but not required. Before formatting the card, you should save the data from the memory card onto the device internal memory ( Copying User Data from a Memory Card , page 110 ). After formatting the card for the ActiveCaptain app, you can transfer the user data back to the card ( Copying User Data to a Memory Card , page 110 ). 3 From the ActiveCaptain page, select Wi-Fi Network > Wi-Fi > On . 4 Enter a name and password for this network. 5 From the application store on your mobile device, install and open the ActiveCaptain app.
6 Bring the mobile device within 32 m (105 ft.) of the ECHOMAP UHD device. 7 From your mobile device settings, open the Wi‑Fi ® connections page and connect to the Garmin device, using the name and password you entered. Enabling Smart Notifications WARNING Do not read or reply to notifications while operating the vessel. Failure to pay attention to the conditions on the water can result in vessel damage, personal injury, or death. Before your ECHOMAP UHD device can receive notifications, you must connect it to your mobile device and to the ActiveCaptain app. 1 From the ECHOMAP UHD device, select ActiveCaptain > Smart Notifications > Enable Notifications .
2 Turn on Bluetooth ® technology in the mobile device settings. 3 Bring the devices within 10 m (33 ft.) of each other. 4 From the ActiveCaptain app on the mobile device, select Smart Notifications > Pair with Chartplotter . 5 Follow the on-screen instructions to pair the app to the ECHOMAP UHD device. 6 When prompted, enter the key on your mobile device. 7 If necessary, adjust which notifications you receive in your mobile device settings. 10 ActiveCaptain App