13 Tip the product back down so that it rests on its feet. 14 On the right side of the printer door, pull up on the front output door arm (callout 1) to separate it from the front output door. 15 On each side of the printer door, release the tab securing the hinge clip (callout 2) to the hinge, and pull the clip away from the printer door. 2 2 1 2 Figure 26. Printer door removal (4 of 4) 16 Open the printer door approximately halfway, and then lift the printer door off of its hinges. Note As you lift the printer door away from the product, make sure that the flat, flexible cable moves smoothly through the slot in the product. EN Document scanner assemblies 99