Bottom assemblies Formatter pan Note The formatter pan, which contains the formatter and the LIU, can be removed without first removing any other product parts. 1 Follow steps 1 through 8 on pages 96 and 97. Note Be careful not to damage or break the electronic cables and connections underneath the formatter. 2 Remove one grounding screw (callout 1). 3 Pull the flat flexible cable (callout 2) and the small cable (callout 3) out of their connectors. 2 2 2 1 3 2 Figure 63. Formatter pan removal 4 Slide the formatter pan free of the metal brackets. Note During reassembly, make sure the pan is reseated in the brackets. EN Bottom assemblies 137