Cleaning the product Use this process if you discover toner specks or dots on printouts. This process produces a page with toner debris, which should be discarded. To clean the print path Note This process requires copier-grade paper to remove dust and toner from the print paper path. Do not use bond or rough paper. 1 Place the copier grade paper into the document feeder tray. 2 Ensure that the product is in the READY state, and then press E NTER /M ENU . 3 Use the or > key to select SERVICE , and then press E NTER / M ENU . 4 Use the or > key to select CLEANING MODE , and then press E NTER /M ENU . 5 Press E NTER /M ENU to start the cleaning mode.
The device displays the message IN CLEANING MODE until this process is completed. 54 Chapter 3 - Maintenance EN