Left side cover Removal of the left side cover is similar to that of the right side cover. 1 Remove the DIMMs and the back cover (see pages 89 and 90). 2 Turn the HP LaserJet 3200 product so that you face its left side. 3 Remove one screw from the top of the left side cover. 4 Use a flatblade screwdriver to pop the latch at the top of the cover. 5 Release three latches: • at the top • at the front • at the back 6 Rotate the top of the cover away from the product, and then lift the cover off. Note You might have to lift the left side of the product slightly to remove the cover. EN Covers 93