software flash operation. 2.2.6.9 Replacement of VVT Solenoid Coil (intake side) 7 Close the engine compartment cover. Removal Procedure Warning ！ Refer to "Warnings regarding battery disconnection" in " Warnings and Precautions ". 1 Open the engine compartment hood. 2 Disconnect the negative cable of battery, refer to Procedures for disconnecting and connecting battery cable . KX11 PHEV 2023 2-38 Engine control system (DHE15-ESZ) Engine 3 Disconnect the harness connector A of the VVT solenoid coil (intake side). 4 Remove the two fixing bolts 1 of the VVT solenoid coil (intake side) and take off the VVT solenoid coil (intake side).
Installation Procedure 1 Install the VVT solenoid coil (intake side) and tighten the two fixing bolts 1 of the VVT solenoid coil (intake side). Torque: 10N·m Caution Parts from the same supplier must be used, mixing of different suppliers is prohibited. 2 Connect the harness connector A of the VVT solenoid coil (intake side).