15.3 Service Special Utilities >>> IO Information This option allows you to view the information relating to the IO. View the IO Information as follows: 1. In the Service Tests submenu, scroll to “15. Service Special Utilities” and press Enter . 2. In the Service Special Utilities submenu, scroll to “15.3 IO Information “and press Enter . 3. The Printer will start to initialize and the Front Panel will display the following messages: • Getting IO Interface. • Getting Interface info. If there is a failure at this point, the Front Panel will display an error. If no active interface is found, the Front Panel will display “No active interface found. Press any key to finish”. 4.
Once the IO information is obtained, it is displayed on the Front Panel. Press any key to exit. Tests and Utilities 5. Once the process is completed, OK will be displayed on the Front Panel. 15.4 Service Special Utilities >>> Unit Information This option allows you to view the following Printer information: • Firmware version. • Serial Number. • Part Number. • PS Language (for HP Designjet Z6100) View the Unit Information as follows: 128 Chapter 4 Service Tests and Utilities