Print Quality NOTE: • Make sure the most similar paper is chosen to create your own media profiles, taking into account type and finishing (Matt or Gloss) but also weight and thickness.For example, use “HP Universal Instant-dry Gloss” (190 g/mІ, 7.4mil/188 microns) if you are loading a similar 190 g/mІ gloss like paper. Good examples of these are “dtec Photobase Universal 190 gsm” or “Осй Smart Dry Photo Paper Gloss” (190 g/mІ, 188 microns). Do NOT use in this case the “HP Premium Instant-Dry Gloss”, which is much heavier and thicker (260 g/mІ, 10.3mil/260 microns).
• Selecting the wrong basic medium to create a media profile can result in printing issues such as poor color performance or the paper not being advanced accurately. • Do not use the cutter on canvas and Fine Arts papers. Working with other commercially available media 215 Print Mode “Best Quality” or slider in the right position Rendering Resolution (RR) Resolution at which the image is rasterized/processed in the host (in pixels per printed inch, or pppi) Printing Resolution (PR) Resolution at which the image is printed (in dots per inch, or dpi) # passes Other info (OI)Bidirecti onal Typically, the higher the number of passes, the better the image quality, but at a lower speeds.
Also, papers such as glossy paper need a longer drying time that will generally require a higher number of passes. Whether printing when the carriage is traveling in a single direction only (Unidirectional) or in both directions (Bidirectional). Unidirectional modes typically provide better image quality – depending on the number of passes – but at lower speeds. Automatic Cutter Yes (Y) / No (N): Indicates whether cutting will be performed. Even if “Yes” is selected, cutting can be disabled later through the driver. However, if “No” is selected here, cutting cannot be re-enabled through the driver.