Window Position Sensor Removal WARNING!: Switch off the printer and remove the power cable. 1. Remove the Window: • For the 42-inch ⇒ See page 260. • For the 60-inch ⇒ See page 262. 2. Remove the Top Cover: • For the 42-inch ⇒ See page 273. • For the 60-inch ⇒ See page 277. 3. Remove the Right Cover ⇒ See page 264 . 4. Remove the Right Connector Cover ⇒ See page 285. 5. Disconnect the Window Position Sensor cable from the Interconnect PCA. Removal & Installation 6. Unroute the Window Position Sensor cables from the from cable clamp. Window Position Sensor 289