Vacuum Fan Removal WARNING!: Switch off the printer and remove the power cable. 1. Remove the Right Cover ⇒ See page 264 . 2. Remove the Right Connector Cover ⇒ See page 285. 3. Remove the Primer Assembly ⇒ See page 294. 4. Remove the Primer Valves ⇒ See page 296. 5. Remove the Maintenance Cartridge ⇒ See the User’s Guide. 6. Remove the Service Station ⇒ See page 300. 7. Release the Pinchwheel Lever Sensor Cable from the Vacuum Fan. Removal & Installation 8. Disconnect both Vacuum Fan cables (identified 1 and 2) from the Interconnect PCA. 304 Chapter 8 Removal & Installation