HP — Pinchwheel Assembly

11. For the 60-inch model, remove the attachment plate from the center Pinchwheel Subassembly. 12. Remove two T-20 screws ( Type M ) from each Pinchwheel Subassembly (a 90 degree angle screwdriver is included with the replacement Pinchwheel Assembly). NOTE: The illustration shows the 60-inch model center Pinchwheel Subassembly. Removal & Installation 13. Remove the complete Pinchwheel Assembly (including the Cam and Cam Lever) from the Printer. NOTE: Before installing the NEW Pinchwheel Assembly, insert the plastic studs in to each Pinchwheel subassembly. This will make it easier to install the complete Pinchwheel Assembly. Pinchwheel Assembly 427