• Use HP Media to perform the calibration. • Perform the manual advance calibration (Ink -> image quality maintenance -> Paper advance calibration -> Adjust Paper advance), moving from 0 to 100% represent to an advance of the media by 1.5mm per meter. • Check cable connections between the densitophotometer/line sensor and the Carriage PCA. • Replace the Line Sensor ⇒ page 390 System Error: 98:02 (this error code will be logged in the system but will not actually appear on the Front Panel) System Error Codes Problem Description: Switching to lower performance due to Printhead quality. Corrective Action: Try the following: • Perform Printhead alignment.
Continuable and Non-Continuable Error Codes 77