Enabling gNMI in Secure Mode This task is applicable in Cisco IOS XE Amsterdam 17.3.1 and later releases. Note To stop gNxI in secure mode, use the no gnxi secure-server command. gNxI insecure and secure servers can simultaneously run on a device. Note The gnxi commands apply to both gNMI and gRPC Network Operations Interface (gNOI) services. gNxI tools are a collection of tools for Network Management that use the gNMI and gNOI protocols. Note SUMMARY STEPS 1. enable 2. configure terminal 3. gnxi 4. gnxi secure-trustpoint trustpoint-name 5. gnxi secure-server 6. gnxi secure-client-auth 7. gnxi secure-port 8. end 9.
show gnxi state gNMI Protocol Enabling gNMI in Secure Mode Command or Action Purpose Step 4 gnxi server Example: Device(config)# gnxi server Enables the gNxI server in insecure mode. Step 5 gnxi port port-number Example: (Optional) Device(config)# gnxi port 50000 Sets the gNxI port to listen to. • The default insecure gNxI port is 50052. Step 6 end Example: Device(config)# end Exits global configuration mode and returns to privileged EXEC mode. Step 7 show gnxi state Example: Device# show gnxi state Displays the status of gNxI interfaces. gNMI Protocol 17