Laser/scanner 21 23 2 2 Figure 59. Removing the laser/scanner 1 To remove the laser/scanner: a Remove the rear right side cover (page 138). b Remove the control panel (page 139). c Remove the top cover (page 141). 2 Unplug the three connectors (callout 1) as shown. The laser/scanner is on top of the printer, tilted toward the rear. 3 Remove the screw to disconnect the grounding cable (callout 2). 4 Remove the four recessed screws around the edges of the laser/scanner. Do not remove the three small screws on the cover of the laser/scanner. CAUTION Do not loosen the Allen screw on the rear of the scanner assembly. 5 Lift the laser/scanner straight up.
Hint When you replace the laser/scanner, be sure the black shutter interlock arm (callout 3) is resting on top of the metal shutter plate. 154 Removing and replacing parts EN