Tray 1 pickup assembly 1 To remove the tray 1 pickup assembly: a Remove the rear right side cover (page 138). b Remove the control panel (page 139). c Remove the top cover (page 141). d Remove the left side cover (page 143). e Remove the front right side cover (page 144). f Remove tray 1 (page 146). 2 2 1 Figure 66. Removing the gear cover 2 Remove the gear cover as follows: a. Remove the self-tapping screw (callout 1) at the bottom of the gear cover. b. Remove the long screw (116 mm/4.8 inches) on the right side of the tray 1 pickup assembly (callout 2). c. Remove the gear cover by pressing down on the claw. EN Chapter 6 Removing and replacing parts 161