Tray 2 paper-feed module disassembly Remove the paper-feeder plate to gain access to the paper pickup drive assembly. It is not necessary to separate the engine module from the paper-feed module to gain access to the paper-size detection PCB, although it will provide easier access. Figure 86. Removing the tray 2 paper-feeder plate 1 Separate the engine module from the paper-feed module (page 171). 2 Remove the tray from the paper-feed module. 3 Remove the four self-tapping screws (one screw is recessed in front). 4 Lift the paper-feeder plate to remove it. 5 Release the two tabs on the paper-size detection PCB cover. 6 Disconnect the three cables on the paper-size detection PCB.
7 Press the two tabs to release the paper-size detection PCB. Note the cable routing. 8 Slide the PCB from the paper-feeder frame. 9 Remove the two machine screws from the paper pickup drive assembly. EN Chapter 6 Removing and replacing parts 179