Table 37. Printer messages (continued) Control panel message Explanation Recommended action 68 NVRAM FULL CHECK SETTINGS An error occurred in the printer’s NVRAM and one or more printer settings has been reset to its factory default. 1. Print a configuration page and check the printer settings to determine which values have changed. 2. Hold down C ANCEL J OB while turning the printer on. This will clean up the NVRAM by removing old areas that are not being used. 68.X PERMANENT STORAGE ERROR alternates with CHECK SETTINGS An error occurred in the printer’s permanent storage and one or more printer settings has been reset to its factory default.
Print a configuration page and check the printer settings to determine which values have changed. 68.X PERMANENT STORAGE FULL The printer’s permanent storage is full. Some settings might have been reset to the factory defaults. 1. Print a configuration page and check the printer settings to determine which values have changed. 2. Hold down C ANCEL J OB while turning the printer on. This will clean up the permanent storage by removing old areas that are not being used. 69.X PRINTER ERROR alternates with CYCLE POWER TO CONTINUE A temporary printing error occurred. X description: 0 = The duplex mechanism has failed 1. Turn the printer off, and then turn the printer on. 2. Reseat the duplexer.
3. Replace the duplexer. 216 Troubleshooting EN