Table 22. Paper handling menu (continued) Item/Default value Values Explanation TRAY 3 TYPE= PLAIN For supported print media types, see page 28. This item appears only when a third paper tray is installed. Set the value to correspond with the media type currently loaded in tray 3. TRAY 4 TYPE= PLAIN For supported print media types, see page 28. This item appears only when a fourth paper tray is installed. Set the value to correspond with the media type currently loaded in tray 4. SMALL PAPER SPEED=NORMAL NORMAL SLOW Select SLOW when alternating printing envelopes (or small media sizes) and standard media sizes and print problems appear. Be sure to return the speed to NORMAL when finished.
When SLOW is selected, the printer briefly pauses between pages to reduce the possibility of a repeating image. MANUAL FEED=OFF OFF ON Feed the print media manually from tray 1, rather than automatically from a tray. When MANUAL FEED=ON and tray 1 is empty, the printer goes offline when it receives a print job and displays MANUALLY FEED [PAPER SIZE] . DUPLEX=OFF OFF ON This item appears only when an optional duplexer is installed. Set the value to ON to print on both sides (duplex) or OFF to print on one side (simplex) of a sheet of paper. BINDING= LONG EDGE LONG EDGE SHORT EDGE This item appears only when an optional duplexer is installed and DUPLEX=ON .
Choose the binding edge when duplexing (printing on both sides of paper). 58 Printer operation EN