Service menu To enter the service menu, see “Service mode” on page 74. Figure 6. Service menu Changing settings The item-count value is changed using a different method than is used for other control panel values. Instead of increasing the entire value by increments, each digit can be selected and modified individually. The following control panel keys are used to modify the page count value: S ELECT Enters any changes to the current digit and advances the cursor one digit to the right. If the last digit is currently selected, pressing the S ELECT key wraps the cursor around to the first digit. V ALUE - Increases the value of the currently selected digit by one.
Pressing V ALUE + when 9 is the value of the currently selected digit will change the value of the digit to 0. – V ALUE Decreases the value of the currently selected digit by one. Pressing – V ALUE when 0 is the value of the currently selected digit will change the value of the digit to 9. EN Chapter 3 Printer operation 75