Hantek 6022BE 2.1 The User’s Interface Click the software icon on the desk after you finished the software setting and equipment connecting. Then a user interface will be showed as follows: In addition to displaying waveforms, the display area is filled with many details about the waveform and the oscilloscope control settings. 1. The Main Menu All settings can be found in the main menu. 2. The Toolbar 3. Control Panel 4. The Horizontal Panel The user can change Time/Div, format in the panel. 5. The Vertical Panel The user can turn on/off the CH1/CH2. Also the user can change the CH1/CH2 volt/div and probe attenuation. 6.
The Trigger Panel In this panel, the user can change the trigger mode, sweep, source and slope. 7. Displays the system time. 8. Displays Sample Rate 9. Displays the main time base setting. User’s Manual 17